- Problems with HFS3 RX7 install
- FAV location
- HFS-3 v3.1
- Failsafe at Full Throttle
- Flow issues in 09 Mazdaspeed 3
- Power button off on gauge & not dropping boost?
- Ecoboost Mustang
- Dual injector setup how too?
- Fail safe wiring
- Jet size
- Gauge Dimmer?
- Mini Cooper HFS-3v3.1 help.
- Relay clicking sound
- 2006 Golf GTI 2.0 TFSI (BWA Engine)
- Weird cutting out issues, can I get my unit tested?
- Sensor and FAV technical questions for a Motec Driven Aquamist
- Checkvalves
- The only indicator still working on the gauge is “water level”. The pump wouldn’t switch on. HFS3.
- Sprintex supercharged Honda FIT nozzle
- No injector signal at gauge
- question about cables !
- not spraying on boost
- No bars on gauge.
- MAP Switch Failsafe Output
- Question about hfs-1
- HFS-3 Kit - Audi TT
- Gauge Issue
- Example of a PWM map?
- No water level warning
- HFS 3 issue on Evo X
- HFS3 v3 massive issues
- 4mm quick connector?
- HFS3 wiring ecu area
- Gauge damage, possible other effects?
- wi led on
- Aquamist 3 issues
- Converted to P&H injectors, now have issues :-(
- Intermittent HFS-3 Failure
- Flow sensor testing
- Pump above water level - Primer pump needed?
- Intermittently working 03 RS6
- Mazda RX7 FD3S Series 8 Setup
- E39 M5 wiring issue
- My meth injection stoped working need help pls
- HFS3 V2KC default pcb setting
- HFS3 - Pump Relay Failure
- Hfs3 wiring to vipec v88 and jet for jdm supra 97
- Jet not spraying
- HSF-3 VW Jetta GLI Install Problem
- HFS-3 on BMW 535d
- Wiring diagram for opel (Vauxhall) astra j A14NET
- Questions regarding FAV
- Recommendation sizing and positioning
- Direct port nozzles
- Differences between v2 and v3?
- 3SGTE wiring failsafes
- Question about the different FAVs
- Question on the selection Aquamist NFB-3 or 4, Subaru Forester sh 2011
- Setting WL
- 4M gauge cable?
- HFS-3 + Holley Dominator EFI?
- Problems with set up
- New install issues
- Water Level light
- Identifying WMI nozzles
- Nozzle selection for MPS3
- HFS3 - GTI 5 Setup
- HFS3 help needed for wiring mk5 R32 turbo
- HFS-3 Controller Blowing Fuse - Fixed
- confused with hsf pcb
- FAV resistance
- Flow sensor behavior changed after removing it
- Gauge on/off button no longer working. System disabled.
- Tank/flow sensor compatibility
- Flickering blue light ?
- HFS2 vs HFS3 help identifying what i have
- 5th jet sizing for 4 cylinder
- Gauge on/off button not working. System enabled but not working
- Direct port bundle
- HFS-3 Tests O.K., but No Bar.Graph During.Operation
- Pulsed output
- Failsafe didn't catch a no flow jet (non conclusive:aq)
- Pump not running, no power signal from controller to pump relay
- Best location for Jets?
- lancer Evolution: HFS3 issues
- 2011 WRX STI Safe-Mode (Help)
- Question about the Gain knob
- Direct port or not ?
- Mk5 - GTI - MPS BAsed - Not hitting 95% IDC
- r53 specific controller setup.
- 100% MPS - How to Set Threshold & Gain
- Hfs-3.1 soldering
- Definition of the restrictor.
- Aquamist pump 806-582 real flow
- FAV making noise but not letting fluid pass