Reputable company for Water Injection Install

[mb_3sgte]

Hi All,

didn't know where to plonk this so just plonked it here :D

could anyone suggest a reputable place in the UK, where i can get a Water Injection install carried out? I am based in the Midlands, however i dont mind travelling abit for the job to be done correctly.

Am basically looking at the Aquamist 2C system with 2E gauge.

I basically need a nice solid and clean installation.

The car is a 550BHP+ MR2 Turbo and possibly more with the 1.06 Garrett turbo housing once its fully mapped. Hence i need solid failsafes in place along.

Look forward to replies.

Cheers

[Richard L]

Hi All,

didn't know where to plonk this so just plonked it here :D

could anyone suggest a reputable place in the UK, where i can get a Water Injection install carried out? I am based in the Midlands, however i dont mind travelling abit for the job to be done correctly.

Am basically looking at the Aquamist 2C system with 2E gauge.

I basically need a nice solid and clean installation.

The car is a 550BHP+ MR2 Turbo and possibly more with the 1.06 Garrett turbo housing once its fully mapped. Hence i need solid failsafes in place along.

Look forward to replies.

Cheers


I know of a company in Luton, Bedfordshire called PTS. They know our product very well. The 2e is not in Production. The 2c can only work with third party management system. I think a 2d or 1s +DDS3 is a good choice.

Richard

[mb_3sgte]

Thanks Richard, i'll check them out. I will be running a Motec M400 so a 2c should be ok.

Thanks