ajrdds
01-05-2006, 08:20 PM
Wireing 2d to 97 miata #1 injector. Red and green of 2d to what colors on injector?
Or, red and green of 2d to what pinouts on ecu?
Thanks in advance for any help. AJRDDS
Richard L
02-06-2006, 12:03 AM
The red wire to a constant, switched 12V, The green wire splice to the pulse wire of the injector harness.
If you are not sure which is which, just put the red wire to the battery+ temporarily and test the green wire to either one of the injection wire. The wire that makes the green led blinks (on FIA2) is the pulsed wire.
Richard
vBulletin® v3.8.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.