mrpeterparker
15-04-2009, 12:03 AM
For reference ... my setup is as follows
PJk04 turbos
Giac 3- + 5bar FPR
Darintake
ER's
Aquamist W/M
Piggies
Milltek
***This is not a full stage 3 setup***
Running on 93 octane and power is approx 300whp ...
Ok the question, Where should i set the trip-adj at ????
With my current setup the injectors get buried and actually reach a 140% IDC. I'll link a few charts, if any other charts would help lmk and i'll see if i can procure them from the same run.
thanks!
http://www.customperformancesolutions.com/logs/petern/giac_3minus_tip_ers/peter_parker_ers_4runs_compare_graph_v11 .16_3306_image027.gif
http://www.customperformancesolutions.com/logs/petern/giac_3minus_tip_ers/peter_parker_ers_4runs_compare_graph_v11 .16_3306_image002.gif
[/img]
PJk04 turbos
Giac 3- + 5bar FPR
Darintake
ER's
Aquamist W/M
Piggies
Milltek
***This is not a full stage 3 setup***
Running on 93 octane and power is approx 300whp ...
Ok the question, Where should i set the trip-adj at ????
With my current setup the injectors get buried and actually reach a 140% IDC. I'll link a few charts, if any other charts would help lmk and i'll see if i can procure them from the same run.
thanks!
http://www.customperformancesolutions.com/logs/petern/giac_3minus_tip_ers/peter_parker_ers_4runs_compare_graph_v11 .16_3306_image027.gif
http://www.customperformancesolutions.com/logs/petern/giac_3minus_tip_ers/peter_parker_ers_4runs_compare_graph_v11 .16_3306_image002.gif
[/img]