Pit Viper
28-07-2009, 03:46 PM
Here's a shot of my engine (haven't put the covers back on) with my custom accordian hose replacement to fit the 90mm MAF housing:
http://i146.photobucket.com/albums/r257/dimone2/Aquamist/DSC_5467.jpg
Here's a shot of where I have the jets located, until I can get a spare intake manifold and do my 6-jet direct-port setup:
http://i146.photobucket.com/albums/r257/dimone2/Aquamist/DSC_5469.jpg
Next the tank and pump location. You'll have to pardon the power wires all over, I'm using a distribution block that will also power my amps, and until I figure out exactly how I'm mounting them, I haven't bothered to mount the block yet:
http://i146.photobucket.com/albums/r257/dimone2/Aquamist/DSC_5471.jpg
brain box:
http://i146.photobucket.com/albums/r257/dimone2/Aquamist/DSC_5474.jpg
DDS3 gauge:
http://i146.photobucket.com/albums/r257/dimone2/Aquamist/DSC_5477.jpg
and where I'm going to mount it, and a boost gauge, as soon as I can rig up a pod:
http://i146.photobucket.com/albums/r257/dimone2/Aquamist/DSC_5475.jpg
http://i146.photobucket.com/albums/r257/dimone2/Aquamist/DSC_5467.jpg
Here's a shot of where I have the jets located, until I can get a spare intake manifold and do my 6-jet direct-port setup:
http://i146.photobucket.com/albums/r257/dimone2/Aquamist/DSC_5469.jpg
Next the tank and pump location. You'll have to pardon the power wires all over, I'm using a distribution block that will also power my amps, and until I figure out exactly how I'm mounting them, I haven't bothered to mount the block yet:
http://i146.photobucket.com/albums/r257/dimone2/Aquamist/DSC_5471.jpg
brain box:
http://i146.photobucket.com/albums/r257/dimone2/Aquamist/DSC_5474.jpg
DDS3 gauge:
http://i146.photobucket.com/albums/r257/dimone2/Aquamist/DSC_5477.jpg
and where I'm going to mount it, and a boost gauge, as soon as I can rig up a pod:
http://i146.photobucket.com/albums/r257/dimone2/Aquamist/DSC_5475.jpg