HFS-3 BMW E36

[jmargo]

Don't mind the pics I am no photographer.
3.2L motor, 12.5lbs of Boost, Vortech V2-SQ Si trim
http://i164.photobucket.com/albums/u16/jmargo1/DSC01979.jpg
All the bits...
http://i164.photobucket.com/albums/u16/jmargo1/DSC01985.jpg
Some tunes and a Howerton 1.25G tank
http://i164.photobucket.com/albums/u16/jmargo1/DSC01962.jpg
http://i164.photobucket.com/albums/u16/jmargo1/DSC01945-1.jpg
PVM Bracket
http://i164.photobucket.com/albums/u16/jmargo1/DSC01975.jpg
http://i164.photobucket.com/albums/u16/jmargo1/DSC01977.jpg
1.0 Jet
http://i164.photobucket.com/albums/u16/jmargo1/DSC01978.jpg
Howerton Trim ring
http://i164.photobucket.com/albums/u16/jmargo1/DSC01982.jpg

[Richard L]

very nice install. Like the bracket and the right angle jet.

[jmargo]

Nozzles installed....

http://i164.photobucket.com/albums/u16/jmargo1/IMG_5859.jpg

[Richard L]

Just love those 90 degree banjoo fittings.

[jmargo]

New stuff....Changed to a back lite LED, adding a 3rd nozzle in the SC volute.

http://i164.photobucket.com/albums/u16/jmargo1/IMG_7646.jpg

http://i164.photobucket.com/albums/u16/jmargo1/IMG_7641.jpg

[Richard L]

very nice. You should take up photography, good pictures.

I believe you are lowering the boss.

[jmargo]

very nice. You should take up photography, good pictures.

I believe you are lowering the boss.

That is correct.....
http://i164.photobucket.com/albums/u16/jmargo1/IMG_7650.jpg
http://i164.photobucket.com/albums/u16/jmargo1/IMG_7652.jpg
http://i164.photobucket.com/albums/u16/jmargo1/IMG_7656.jpg

The height difference between tanks...and the new pump input swivel.

http://i164.photobucket.com/albums/u16/jmargo1/IMG_7639.jpg

[jmargo]

Looks like I can say I am done...for now
New adapter from Howerton Eng. As you can see it sits on top of the jet and allows provisions to feed the other two.
http://i164.photobucket.com/albums/u16/jmargo1/IMG_7707.jpg
http://i164.photobucket.com/albums/u16/jmargo1/IMG_7708.jpg

And the final placement. 2X 0.7 nozzles and a single 0.3 in the volute.

http://i164.photobucket.com/albums/u16/jmargo1/IMG_7706.jpg

[Richard L]

I can't stop looking through those pictures repeatly. Work of art. Nice utilisation of thise cute little fittings from Howerton.

I aslo heard youn have good success with the controller reading the tec3 ECU. What next, armed with all those cooling jets. Boost to 25psi?

[jmargo]

I can't stop looking through those pictures repeatly. Work of art. Nice utilisation of thise cute little fittings from Howerton.

I aslo heard youn have good success with the controller reading the tec3 ECU. What next, armed with all those cooling jets. Boost to 25psi?

Yes, The controller is working great !! I really appreciate the work that went in to getting the system in-line with the car.

Not sure what is on the horizon...but I am thinking maybe 17-18psi would be a good place to be.

[jmargo]

Looks like I can't leave anything alone....decided to add a pre SC nozzle in my spare thermoplastic intake. This is the 0.3 from the volute which now has a 0.4. Now that I have four nozzles I think the four port manifold will go in place of the three port jet manifold.

http://i164.photobucket.com/albums/u16/jmargo1/IMG_7717.jpg

http://i164.photobucket.com/albums/u16/jmargo1/IMG_7726.jpg

[jmargo]

So I am sure Jeff is sick of me changing everything around. He was nice enough to fab up a bracket and sold me the four port manifold for a cleaner install. I now promise that I am done......


but I am thinking that it would look alot better with AN lines.

http://i164.photobucket.com/albums/u16/jmargo1/IMG_7799.jpg

http://i164.photobucket.com/albums/u16/jmargo1/IMG_7802.jpg

[jmargo]

Well technically I did not change anything....
New offering I just picked up from Howerton engineering. Its a basic switch to trigger the WI anytime you want to cool things down. Basic,simple and clean !!
http://i164.photobucket.com/albums/u16/jmargo1/IMG_7805.jpg

[Richard L]

Wow, you have the remote spray button? This is for staging on the drag strip?

One more toy for you. The new HFS-3 has a new function, your can set the DC% of the spray when you press the button.

[Howerton Engineering]

I had glossed over that. We can set it up so the test jumper sprays a certain DC instead of 100%.

[jmargo]

I had glossed over that. We can set it up so the test jumper sprays a certain DC instead of 100%.

Is that on the board or does it need to be "flashed" ?

Wow, you have the remote spray button? This is for staging on the drag strip?

One more toy for you. The new HFS-3 has a new function, your can set the DC% of the spray when you press the button.

Installed and tested !! I am thinking its use will be more for cruising down the highway, having someone pull up to me, downshift to bring up the revs, pre-spray to cool things down and get the air out of the lines then WOT.

[jmargo]

Because I have a nozzle in the intake I had siphoning so I added two checkvalves....
http://i164.photobucket.com/albums/u16/jmargo1/IMG_7852.jpg

[Richard L]

You have left no stone unturned. I always enjoyed lloking at those nice images you posted.

[Dust]

This kit is beautiful, as is the car. Could you PM me and let me know how much you have in the system?

[jmargo]

This kit is beautiful, as is the car. Could you PM me and let me know how much you have in the system?

Well that is easy...
HFS-3 plus Howeton tank (group buy)
4 Port manifold
2 extra nozzles and adapters
4 90deg fittings
2 check valves
1 pump swivel
1 test circuit
= just about $1000 USD

[Canyata]

wow, the pics are amazing,,, the engine of this car looks great

[kll006]

Nice pictures. Looks brilliant.

[parmas]

NICE AND CLEAN SETUP JMARGO !

[richbmw]

not suprised it works incredible

[TryDIY]

Don't mind the pics I am no photographer.
3.2L motor, 12.5lbs of Boost, Vortech V2-SQ Si trim
http://i164.photobucket.com/albums/u16/jmargo1/DSC01979.jpg
All the bits...
http://i164.photobucket.com/albums/u16/jmargo1/DSC01985.jpg
Some tunes and a Howerton 1.25G tank
http://i164.photobucket.com/albums/u16/jmargo1/DSC01962.jpg
http://i164.photobucket.com/albums/u16/jmargo1/DSC01945-1.jpg
PVM Bracket
http://i164.photobucket.com/albums/u16/jmargo1/DSC01975.jpg
http://i164.photobucket.com/albums/u16/jmargo1/DSC01977.jpg
1.0 Jet
http://i164.photobucket.com/albums/u16/jmargo1/DSC01978.jpg
Howerton Trim ring
http://i164.photobucket.com/albums/u16/jmargo1/DSC01982.jpg

I think i am in love pictures look amazing