PDA

View Full Version : distribution


jmargo
06-10-2010, 06:10 AM
So the question has arisen again on even distribution and how to make sure cyl 1 and 6 are seeing the same mixture as 2 through 5.

http://i164.photobucket.com/albums/u16/jmargo1/IMG_7823.jpg

Richard L
06-10-2010, 08:19 AM
Take a look at the video on this thread, the environment in the plenum is pretty stormy one, there isn't a set pattern and very random. Chances are each cylinder will receive its share of water on average.

http://www.aquamist.co.uk/vbulletin/showthread.php?t=624

jmargo
06-10-2010, 03:52 PM
Will I have the same affect with a manifold that adds two cylinders and length ?

Richard L
06-10-2010, 05:02 PM
The real answer is ... I don't know.

I can just image putting a handful of confetti in a soda bottom, direct some compressed air into it see how the confetti behaves.