View Full Version : VW Golf5-2l TFSI wiring diagram
Richard L
02-10-2011, 11:43 AM
http://www.aquamist.co.uk/HFS3/VW/Golf-CDL/H3v2-Golf_CDL.gif
============
http://www.aquamist.co.uk/HFS3/VW/Golf5-BWA/H3v2-Golf5-3.gif
SammyVW
29-03-2012, 10:48 PM
Hi Richard.
Would this diagram also apply to the VW/Audi TSI found in the mk6 gti?
I'm looking at getting the HFS3 system
Richard L
29-03-2012, 11:31 PM
As far as I know, the VW and Audi only share the ECU box but pin out and wire colour are different. If you have a link to MK6 gti, do post it here, email or pm me. I am more than happy to make new wioring drawings for them.
If you have the Golf MK6 with DI fuel system, it is recommended to go for the HFS-4. It reads fuel pressure as well and sharing the manifold pressure with the IDC.
SammyVW
30-03-2012, 12:06 AM
As far as I know, the VW and Audi only share the ECU box but pin out and wire colour are different. If you have a link to MK6 gti, do post it here, email or pm me. I am more than happy to make new wioring drawings for them.
If you have the Golf MK6 with DI fuel system, it is recommended to go for the HFS-4. It reads fuel pressure as well and sharing the manifold pressure with the IDC.
Looks like the HFS4 is the best option... just getting one is the problem now..
Richard L
05-08-2012, 10:00 PM
Wiring Updated
Richard L
17-05-2013, 09:50 PM
Wiring Updated May 2012
rasheedn
19-01-2014, 12:16 PM
hi Richard
i have the v3
A section is not there!
any ideas?
Richard L
19-01-2014, 12:53 PM
The V3 switches input automatically. the A section is unnecessary.
What engine code do you have, I will make a v3 drawing.
rasheedn
19-01-2014, 07:02 PM
thanks
i have the bwa engine
the wiring is not the same except for the injectors i think
i am not going to use the map sensor nor the failsafe
vBulletin® v3.8.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.