VW Golf 5&6 (TFSI)

[Richard L]

http://www.aquamist.co.uk/HFS4/wiring/VW-Golf-5-6/H4-v2-Golf_CBFA.gif


==============


http://www.aquamist.co.uk/HFS4/wiring/VW-Golf-5-6/H4-Golf 6 (CDL_CRZA).gif


==============

http://www.aquamist.co.uk/HFS4/wiring/VW-Golf-5-6/H4-Golf 5-6-CBFA.gif


==============


http://www.aquamist.co.uk/HFS4/wiring/VW-Golf-5-6/H4-Golf 5-6-CCTA.gif


==============

http://www.aquamist.co.uk/HFS4/wiring/VW-Golf-5-6/H4-Golf 5-6-CCZA_B.gif


=============

http://www.aquamist.co.uk/HFS4/wiring/VW-Golf5/H4-Golf5-BWA+AXX.gif





Golf GTI Mk5/Rabbit (A5/Type 1K 2004-2008) 2.0 TFSI (200PS) ............... (BAW/CAWB)
Golf GTI Mk5/Rabbit (A5/Type 1K 2007-2008) 2.0 TFSI (230PS) ............... (BYD)

Golf Mk5 (A5/Type 1K 2005-2009) 1.4 TSI (120-170PS) ............... (CAXA/BMY/CAVBD/BLG)

[okswerve16]

Would this diagram be applicable to an a4 fsi?

[Richard L]

I am not sure. does the ECU look like the on eion the a4?

I want to make a A4 wiring diagram but I do not have a ecu pin out info. If you know I can find them, please send me a link [richard@aquamist.co.uk].

[Richard L]

Does this one look OK to you? If it is OK, I can transfer the rest onto the H4.

http://www.aquamist.co.uk/vbulletin/showthread.php?t=1698

[okswerve16]

I just sent my ECU to EPL today when it comes back to me I can send you pictures but it looks very similar to the one above. I have the bentley manual maybe in their is the pinout diagram I will check this weekend as well.

[Richard L]

That will be good. based on the link, it appeared the ECU is tj esame. We shall confirm this when you get youtr ECU back. my email: [richard[at]aquamist.co.uk].

If this is the case, it will be great. I start making the drawing anyway.

[madvally]

Hi Richard, Can you please post up a wiring / ecu pin out for VW 2.0 FSI with engine code CDL - fitted to 2012 VW Scirocco R?

I am connecting up a FRC HFS2-v2 to my car. Your help will be most highly appreciated.

Thanks.

[Richard L]

New CDL- wiring drawing posted.

[madvally]

Thanks Richard.

[abo097]

Hey guys.
My engine on the US Golf R is CRZA...wondering wich diagram is applicable to my platform?

[Richard L]

I will look it up.

[Richard L]

I will look it up.

The wiring will be the same as the updated second diagram.

[javialcala]

Hello Richard
You post wired diagram of Golf5 BWA engine.
, is golf gti mkV (2005) (AXX engine) wired diagram(hfs4 V3) same that BWA engine?

Thank you.

[Richard L]

Every wire is he same except for the BCV, which is on T60/4, not T94/4.

We will correct the BWA drawing.

[Richard L]

The Golf 5 BWA/AXX is now updated.

[javialcala]

Thank you. I have installed Aquamist hfs4 in my golf gti mk5 AXX and work perfect :)

[Richard L]

Do post some install pictures. Most impressed, did not run into any unknowns.

[A3Scott20]

Hello Richard,

Does the wiring diagram for CCZB is the same as wiring diagram for CCZA?

Thanks.

[Richard L]

Your engine is up there. look closer at the title of the drawings.

[A3Scott20]

Sorry Richard but I have only seen CBFA, CDLC, CDLF, CRZA, CCTA, CCTB, BWA, AXX and no CCZA available since my car is ROW 2012 Audi A3 2.0 TSI.

NA (north america) MK5/MK6 2.0 TSI Engine
CCTA
CBFA
CCT and CBF denote the engine's mechanical structure. i.e. secondary injection (CBF) vs non secondary injection (CCT). A, the 4th letter, denotes the power output for the calibration, i.e both rated in the us for 207ft-lb/200hp.

ROW (rest of the world) MK6 and A3 2.0 TSI Engines
CCZA - A3
CCZB - MK6
CCZ denotes the european mechanical structure. A and B denote a software calibration change for different power levels.
A has 200hp, B has 210hp.

- TSI Trans CBFA NA 2.0 TSI 200 HP
- TSI Trans CCTA NA 2.0 TSI 200 HP
- TSI Trans CCZA ROW 2.0 TSI 147kW (200 PS), 280Nm
- TSI Trans CCZB ROW 2.0 TSI 154kW (210 PS), 280Nm

[Richard L]

Just checked, the CCZA and CCZB wiring is identical. I will update the title.

[A3Scott20]

Thank you very much for your great support Richard.