Tubing off Tee no tthe same. Does it matter?

[ek9max]

I'm just finsihing off my install. My installer has different lengths off the tee for the dual nozzle kit. Does it matter?

Here's a pic.

http://i799.photobucket.com/albums/yy280/ek9max/3075a542.jpg

[Richard L]

This set up is not going to matter as there is little pressure differences between the locations.

[ek9max]

Thanks! I was worried the farther one wouldn't get enough pressure.

[Richard L]

The ID of the 4mm hose is plenty enough to flow over 3 litres a minute.