Meister Eder
09-09-2014, 03:02 PM
Hey,
I received my new HFS4-v3-System and I am going to use it for a DI-System.
I have some questions for configurating the Controller and unfortunatly I was not able to find answers in other threads.
Fuelinjection ICD detection (green cable, grey RJ45-connector):
The wiring diagram shown on page 7 of the manual seems to be for port-injection-systems, because in my opinion connecting the green cable with (-)pin of a DI-fuel injector (solenoid) might cause a damage of the controller?!
So what to do with the green cable of the grey RJ45-connector in case of a DI-System?
IDC pre-amplifier gain:
There are three options for the IDC pre-amplifier:
x1.0, x1.5 and x2.5.
x.1.0 ist for "some DI systems", x2.5 for "95% of the current DI fueling systems" (Manual, page 21).
Can you help me finding the correct configuration for my DI-system (solenoid)?
Thank you very much!
Meister Eder
I received my new HFS4-v3-System and I am going to use it for a DI-System.
I have some questions for configurating the Controller and unfortunatly I was not able to find answers in other threads.
Fuelinjection ICD detection (green cable, grey RJ45-connector):
The wiring diagram shown on page 7 of the manual seems to be for port-injection-systems, because in my opinion connecting the green cable with (-)pin of a DI-fuel injector (solenoid) might cause a damage of the controller?!
So what to do with the green cable of the grey RJ45-connector in case of a DI-System?
IDC pre-amplifier gain:
There are three options for the IDC pre-amplifier:
x1.0, x1.5 and x2.5.
x.1.0 ist for "some DI systems", x2.5 for "95% of the current DI fueling systems" (Manual, page 21).
Can you help me finding the correct configuration for my DI-system (solenoid)?
Thank you very much!
Meister Eder