W.Injection Partially Lit Up

[Gatehouse]

Good Day,

I have no issues with my system other than the fact that sometimes the W.Injection LED partially lights up. The LED is not completely lit up and I cannot replicate the problem. Ill just look at the gauge sometimes, and its like this.

Any idea as to why?

http://i.imgur.com/HjpswZGl.jpg

[Richard L]

You can set the FSDL two clicks clockwise to eliminate it.

[Gatehouse]

Thanks Richard, Ill do this ASAP!

[Gatehouse]

Okay guys, I re-set my FSDL, but it didnt work. I was driving around yesterday and figured it out. Ive got this gauge in a vent pod and its winter where I live, when you have the heat on the light comes on after a while and when you switch it to cool air, the light goes out. Ill be switching this asap so I dont damage the gauge!

[Richard L]

It looked like there is condensation on the circuit board. When hot air hits cold surfaces, droplets will form and partially shorting out some parts of the copper tracks.

In insulate the back of the gauge asap for severe corrosion will take hold.