PDA

View Full Version : GC8 WRX

mrex180
06-02-2006, 01:29 PM
My Experiment! Port injection :D

http://www.geocities.com/kombiez/WI_1.JPG

http://www.geocities.com/kombiez/WI_2.JPG

http://www.geocities.com/kombiez/WI_3.JPG

http://www.geocities.com/kombiez/yahoo19.JPG

http://www.geocities.com/kombiez/yahoo20.JPG

http://www.geocities.com/kombiez/yahoo21.JPG

http://www.geocities.com/kombiez/yahoo23.JPG

http://www.geocities.com/kombiez/yahoo24.JPG

http://www.geocities.com/kombiez/IMGP1913.JPG
DDS3 and Knocklink






Andy
Fish
09-02-2006, 01:47 PM
Brave boy going straight from the turbo to inlet with only WI. What size jets are they? .9 or 1mm

Fish
JohnA
09-02-2006, 06:44 PM
Brave, yes, but not as foolhardy as some might think.

My first turbo engine (kawasaki 750turbo) wasn't intercooled and it could do up to 1 bar with no major drama (OK, it went through a couple sets of pistons in top speed runs :oops: but from the factory it was rated at 0.7bar and NO intercooling)
10-02-2006, 12:02 PM
:lol: Yeah i know i'm fairly brave guy by doing this and there are serious risks involved but i just have to try it and experiment as it would get the better of me otherwise i think..

The jets are 0.5mm too..
mrex180
12-06-2006, 12:44 AM
Update added DDS3 and re-config'd system ready for port injection
slostar
19-06-2006, 06:14 AM
nice. very interested to see how it goes with the port injection
mrex180
19-06-2006, 09:46 AM
Thanks :D The car is definetly different it's little crisper and got little bit more pull with the port injection over the twin jet in the intake tract as i had it before.I will get tuned one-day but i'll be taking the car down 1/4 on the weekend hopefuly and this should answer a few questions that myself and other have been wanting to know..
Fish
19-06-2006, 08:41 PM
Now thats a cool setup.

Fish
slostar
10-07-2006, 07:24 AM
hey,
any updates on this? hows the port injection going?


kris
mrex180
10-07-2006, 02:16 PM
Still playing around with it actually :wink: i have got hold of software to read my stock ecu and do some data logging which will be good because then i can set the system up correctly..
Andy
mrex180
05-12-2006, 10:16 AM
Updated to latest pics..
djerickd
22-02-2007, 06:08 AM
where's your flow meter?
JohnA
22-02-2007, 08:38 PM
Nice closeups :smile:
mrex180
23-02-2007, 01:01 AM
The flow meter is sitting about a handspan away up under the strut brace.