Re: Roots blower mounting suggestions
 

Just an update. I asked a similar question on a GP forum, and a member posted this pic.

Re: Roots blower mounting suggestions
 

Richard, what do you think of the mounting points? I worry about getting to the outside cylinders.

Re: Roots blower mounting suggestions
 

what is the angle of the spray pattern?

Re: Roots blower mounting suggestions
 

I do not remember, but I wanna say 60 or 70 off the top of my head.

Re: Roots blower mounting suggestions
 

I can not think of anywhere else better, given the shape of the casing. I suppose having a wider spray angle may be better, if this option is available.

Re: Roots blower mounting suggestions
 

I asked the nozzle vendor about spray pattern but haven't heard back yet. How wide are the older aquamist nozzles?

Re: Roots blower mounting suggestions
 

Dust, I've been in the 3800 game for years.. Yes, that is where most guys tap into the lim for meth nozzles..

But many have just tapped into the top of the M90 case angled towards the rotors with success for years. From what some have recorded with tapping an iat sensor into the lim is that temperatures did drop pretty good from tapping the blower case itself.

But me personally have always suggested the lim to be tapped for the nozzles.

Re: Roots blower mounting suggestions
 

I was thinking a top swap parts purchase would be a good time to tap if I can find a low priced GT with HUD in good condition. Where did you mount your pump?

Re: Roots blower mounting suggestions
 

we've always set the pumps up in the trunk. Tank went in the spare tire well or mounted on the back of the rear seat.

Re: Roots blower mounting suggestions
 

I have a few huds laying around if you would want one. It can be swapped into a gt.