Gauge on/off button not working. System enabled but not working
 

I have a hfs-3 system, about 4 years old, and it recently stopped working. I noticed that the gauge was off, I pressed the button and it would turn on then off. I pressed it a couple more times thinking the contacts are just dirty and needed to be moved and it worked the gauge stayed on. Even thought the gauge is on, the system isn't working properly. I can't boost beyond wastegate pressure but if I remove the DHB jumper I can boost over wastegate pressure so I know the issue is with the system not the car. Any thoughts on the issue? I'm thinking I need to get a new gauge.

Re: Gauge on/off button not working. System enabled but not working
 

We can repair the newer ones if you send it back to us, we don't charge.. What is the version number or the serial number of the controller?

Re: Gauge on/off button not working. System enabled but not working
 

Richard that would be great. Its a v3.1 SN:102337 , if it can be repaired let me know and I'll send it back to you.

Re: Gauge on/off button not working. System enabled but not working
 

Border line. send it anyway, we will find a way. It is a made in 2015

Shipping address:
(write "return to manufacturer for repair" or tax will be charged. Value is $10)

ERL Ltd
Iroko house
Bolney Ave. Peacehaven
East Sussex BN10 8HF
England
T: +44 1273 581007
F: +44 1273 581555

Re: Gauge on/off button not working. System enabled but not working
 

Your gauge is repaired, please email me richard-at-aquamist-co-uk.