waterinjection.info

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)
-   Aquamist HFS-4 forum (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=48)
-   -   BMW Early N55 HFS4 v3.1 installation (unfinished) (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=2964)

Joey911 29-09-2016 06:22 AM

BMW Early N55 HFS4 v3.1 installation (unfinished)
 
Hi Richard,

I've emailed you about step two of the installation and haven't heard from you since

Recall: I purchased a new HFS4 v3.1 kit from you, you emailed me the step 1, which is moving those jumper to x2.5 IDC pre scaler. Been emailing you about step 2, which I assume is cutting 3 and jump 2 for MAP sensor(cut 3.5 bar, connect 2.5 bar)?

I have a 2011 335i N55 btw...

Joey

Richard L 29-09-2016 06:32 AM

Re: BMW Early N55 HFS4 v3.1 installation (unfinished)
 
Joey,

I just checked all my in boxes, no email form you, if the email address begins with joey....

Can you pm me the date or your email address, I have to make sure it is not arrested by the spam filter. I always answer my emails within a few days.

Joey911 29-09-2016 08:06 AM

Re: BMW Early N55 HFS4 v3.1 installation (unfinished)
 
Quote:

Originally Posted by Richard L (Post 23151)
Joey,

I just checked all my in boxes, no email form you, if the email address begins with joey....

Can you pm me the date or your email address, I have to make sure it is not arrested by the spam filter. I always answer my emails within a few days.

Send you an email via the forum.

Richard L 29-09-2016 08:10 AM

Re: BMW Early N55 HFS4 v3.1 installation (unfinished)
 
got it this time, I will reply.

Joey911 29-09-2016 06:41 PM

Re: BMW Early N55 HFS4 v3.1 installation (unfinished)
 
Quote:

Originally Posted by Richard L (Post 23154)
got it this time, I will reply.

Still haven't got your reply.... I assume you lost me again.

Why don't we talk here? Step one is to set the IDC jumper to x2.5.

Whats next step?

Richard L 29-09-2016 07:34 PM

Re: BMW Early N55 HFS4 v3.1 installation (unfinished)
 
I will talk here from now and stop emailing me.

Richard L 29-09-2016 07:35 PM

Re: BMW Early N55 HFS4 v3.1 installation (unfinished)
 
OK, lets start from the beginning so we can do it properly:

1. the power?
2. Tuning box or standard?

Joey911 30-09-2016 02:21 AM

Re: BMW Early N55 HFS4 v3.1 installation (unfinished)
 
Quote:

Originally Posted by Richard L (Post 23160)
OK, lets start from the beginning so we can do it properly:

1. the power?
2. Tuning box or standard?

1. 2011 BMW 335i with N55 engine, non electronic wastegate

2. Max boost 21 psi (factory 2.5 bar MAP sensor) across the mid range (3000 to 5000 or less), trying to raise it at the redline so I get more "HP" instead of high torque only. still tuning it

3. Tuning box or standard? I'm using Cobb ATR

Richard L 30-09-2016 08:30 AM

Re: BMW Early N55 HFS4 v3.1 installation (unfinished)
 
Here is diagram for the HFS4-v3.1. Please check beofere moving on.

http://www.aquamist.co.uk/HFS4/wirin...-N55-N_EWG.gif

Joey911 30-09-2016 05:18 PM

Re: BMW Early N55 HFS4 v3.1 installation (unfinished)
 
Quote:

Originally Posted by Richard L (Post 23162)
Here is diagram for the HFS4-v3.1. Please check beofere moving on.

http://www.aquamist.co.uk/HFS4/wirin...-N55-N_EWG.gif

Yup this is the sheet we used for installation.


All times are GMT +1. The time now is 06:56 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.