waterinjection.info

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)
-   HFS-4 user manual and wiring diagrams (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=49)
-   -   Mazdaspeed 3 (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=2197)

Richard L 21-03-2012 05:22 PM

Mazdaspeed 3
 

skeurton 18-04-2012 09:02 PM

Re: Mazdaspeed 3
 
I have an aftermarket electronic boost control solenoid running in 3-port interrupt mode. It plugs into the stock harness, just like the stock solenoid. The same principles apply when tuning for it, but it requires much less wastegate duty cycle (at least 25% less) than the stock solenoid.

Can I still follow the wiring diagram above? Or does it need to be wired differently? Here is a link to the product and manual:

Product:
http://www.grimmspeed.com/catalog/pr...roducts_id=194

Manual:
https://www.grimmspeed.com/install_g...MazdaSpeed.pdf

Richard L 19-04-2012 07:18 AM

Re: Mazdaspeed 3
 
Yes, you can continue using the above wiring diagram. We just cut the PWM signal to the BCV. It will work with any valve.

One reason for a lower duty cycle is needed on the grimmmspeed valve is probably due to slightly larger orifice in the ports.

yokimazoku 15-12-2012 08:24 PM

Re: Mazdaspeed 3
 
im wondering what year mazdaspeed this diagram is for. I have a 2007 and im looking at the ecu connector pinout and it seems slightly different. The #1 fuel injector coil - on the sheet im looking at says its 2BA not 2BB. Is there any way to verify this?

yokimazoku 15-12-2012 08:33 PM

Re: Mazdaspeed 3
 
Nevermind that example is correct ignore that post.

jdraps13 13-04-2015 11:46 AM

Re: Mazdaspeed 3
 
Quote:

Originally Posted by Richard L (Post 16461)
Yes, you can continue using the above wiring diagram. We just cut the PWM signal to the BCV. It will work with any valve.

One reason for a lower duty cycle is needed on the grimmmspeed valve is probably due to slightly larger orifice in the ports.

Where would I cut in order for this application? Or is this something you guys do prior?

Richard L 13-04-2015 04:34 PM

Re: Mazdaspeed 3
 
If you place an order from our online shop, we will make the necessary modifications for you. But do make a comment at check out to be sure.

jdraps13 13-04-2015 05:00 PM

Re: Mazdaspeed 3
 
I have the kit already just wondering where the cut point is

Richard L 13-04-2015 05:11 PM

Re: Mazdaspeed 3
 
If you have the kit already, go to page 21 of the user manual. If you have lost the used manual, you can download it from here. Version 3.

jdraps13 13-04-2015 05:20 PM

Re: Mazdaspeed 3
 
So on number 6 cut the connection to the negative?


All times are GMT +1. The time now is 12:36 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.