Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
 

I will be working towards compiling wiring diagrams for as many makes of cars as possible for the HFS-3. I, of course need help from all your guys who owns the car to supply me as much information as possible, with feedback.

I would be grateful if you guys can post some installation images and share the experiences with others.

Richard

Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
 

nice pics there richard... will be good help :)

Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
 

I will try to make more of theres drawings for other cars. It would be nice if people will post some of imechanical work on the HFS-3 install.

I can't wait for the tephra's ALT-MAP for the EvoX.

Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
 

great schematic Richard definatley cleared things up for me.
did the basic wiring today, il get started on the ecu tapping by next weekend.

Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
 

ok thanks Richard the diagrams work 100% for a JDM 8MR, thanks.

Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
 

If you have an opportunity to take some pictures of the install if possible.

Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
 

For the JDM EVO8 MR i am supposed to tap wire 64 for Tephra map switching failsafe, however I am not seeing any wire there...am I supposed to place my own wire there?

Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
 

Yes, the slot is empty. I am not sure where you can get the pins form . there is someome on the evom.net selling a pre-wired cable.

Richard

Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
 

Hi Richard, can you post up a diagram for EVO X (EDM/ADM/JDM) with failsafe using Tephra Alt-Map switch via ECU pin 115?

Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
 

It is updated, at the top.

Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
 

Richard, sorry, my mistake. It should be pin 112 (5V ADC Map switching) and not pin 115 for EDM/ADM/JDM EVO X. Pin 115 is meant for USDM EVO X. Do you mind updating the diagram again? Thanks.

ps: While you are at it, maybe you can correct the typo error in the diagram as well. You currently have it spelt as MITSUNISHI EVOX ECU instead of MITSUBISHI :)

Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
 

Thanks for spotted the mistakes

Please check the updated diagram

Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
 

Thanks Richard. Looks good now!

Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
 

Hi Richard, it's been awhile. Any there any changes to the wiring diagram for HFS-3 v3 for EVO X JDM?

Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
 

The v3 wiring for the EVO X JDM is the same as HFS3-V2.

Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
 

Thanks for the confirmation. :)

Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
 

I don't suppose anyone knows the colors of those particular wires?

What are the colors of the wires in pins 18, 45, 92 and 112 of the ecu?

Thanks in advance, this would be a HUGE help.