Aquamist pump psi and flow rates...
 

What psi does your pump run?
What is the max flow rate your injector (your largest one obviously) can flow?

I have your 2c kit. But, have yet to install it because it may not meet my needs.

I have a single turbo Toyota Supra and have researched WI kits over on Supra Fourms. I saw many posts over there that say your kits cannot flow enough or push enough psi to meet the demand for my application.

20+ psi turbo on a Toyota 2JZ engine pushing over 600rwhp.

The Aquamist pump have the following flowrate:

Pump alone: 330cc/min at 6.5bar

http://www.aquamist.co.uk/forum/flowrate4.gif



Pump + 3-cc accumulator: 375cc/min at 6.5bar

Pump + Priming pump 580cc/min.
See following thread for details:
http://www.aquamist.co.uk/phpBB2/viewtopic.php?t=127[/img]

I have just forgotton, one more choice below:

http://www.aquamist.co.uk/phpBB2/viewtopic.php?t=504