HFS-5 Inline flow control valve problem
Hi, I have installed the HFS-5 kit on a 2013 BMW 6. The pump is coming on underboost, the gauge doesn't recognize any flow. When I apply 12volts to the inline control valve, then the methanol goes through the flow sensor and the gauge recognizes it. I am getting 12volts on the terminal 1 and 2 at the control box. What problem do I have?
Thank you! |
Re: HFS-5 Inline flow control valve problem
You may have a clogged flow sensor. What is the serial number? Some later ones are serviceable.
|
Re: HFS-5 Inline flow control valve problem
Quote:
When there is methanol flowing through the flow sensor, the gauge is recognizing the flow. My problem is I am not getting the methanol past the inline flow control valve and I know the valve is good because when I apply 12volts to it, then the methanol goes through it, the flow sensor sees it and shows in on the gauge. Any other ideas? Thanks for your help. |
Re: HFS-5 Inline flow control valve problem
How did you active the valve before applying 12V to it.
|
Re: HFS-5 Inline flow control valve problem
Quote:
|
Re: HFS-5 Inline flow control valve problem
Lets go back a step.
Which version of HFS5 do you have? Look at the controller box. |
All times are GMT +1. The time now is 05:21 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.