waterinjection.info - Aquamist Jet Thread Pitch and Side (Inlet Side)

Page 2 of 2

Show 40 post(s) from this thread on one page

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)

- Aquamist HFS-3 forum (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=34)

- - Aquamist Jet Thread Pitch and Side (Inlet Side) (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=2299)

JimK	07-10-2012 05:32 AM

Re: Aquamist Jet Thread Pitch and Side (Inlet Side)

I have some of these old-style jets too (that are new) I'd like to use. I want to thread in an adapter so I can go straight to a 4mm quick connect elbow.

So, what's the pitch of the 1/4" thread? Is it really 25 TPI?! 1/4" - 28 would be more convenient

Richard L

07-10-2012 09:34 AM

Re: Aquamist Jet Thread Pitch and Side (Inlet Side)

I believe it is UNC 20TPI for the old jet

M6 x 0.5mm for the current jets

All times are GMT +1. The time now is 06:01 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page