2001 Audi S4 2.7T - Stage 3- - Giac Software
 

For reference ... my setup is as follows

PJk04 turbos
Giac 3- + 5bar FPR
Darintake
ER's
Aquamist W/M
Piggies
Milltek

***This is not a full stage 3 setup***

Running on 93 octane and power is approx 300whp ...

Ok the question, Where should i set the trip-adj at ????

With my current setup the injectors get buried and actually reach a 140% IDC. I'll link a few charts, if any other charts would help lmk and i'll see if i can procure them from the same run.

thanks!

http://www.customperformancesolution...6_image027.gif

http://www.customperformancesolution...6_image002.gif

[/img]

Boost reference is not that suitable because there is no further WAI enrichment after wastegate pressure.

all the charts/logs i have are here for that particular run

http://www.customperformancesolution...p_ers/logs.php