waterinjection.info - Nozzle sizes

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)

- General Effects (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=14)

- - Nozzle sizes (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=2619)

maaxxyy

15-05-2014 12:58 AM

Nozzle sizes

Hi guys i've just jioned the forum as i'm thinking on building a water/meth kit for my car.
I have a 92 VW Corrado G60, 190-200 bhp, chipped and pulleyed (68mm), running standard injectors (green 280cc) and approximately 1.0 bar of boost.
Can anyone advise me on what size nozzle i would need to run in it? Regards

Richard L

31-05-2014 06:58 PM

Re: Nozzle sizes

around 200-300cc/min nozzle for M50/W50 is a good start.

All times are GMT +1. The time now is 11:20 AM.