waterinjection.info

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)
-   Off-topic (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=23)
-   -   Reputable company for Water Injection Install (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=1046)

mb_3sgte 25-04-2006 01:10 PM

Reputable company for Water Injection Install
 
Hi All,

didn't know where to plonk this so just plonked it here :D

could anyone suggest a reputable place in the UK, where i can get a Water Injection install carried out? I am based in the Midlands, however i dont mind travelling abit for the job to be done correctly.

Am basically looking at the Aquamist 2C system with 2E gauge.

I basically need a nice solid and clean installation.

The car is a 550BHP+ MR2 Turbo and possibly more with the 1.06 Garrett turbo housing once its fully mapped. Hence i need solid failsafes in place along.

Look forward to replies.

Cheers

Richard L 26-04-2006 12:23 AM

Re: Reputable company for Water Injection Install
 
Quote:

Originally Posted by mb_3sgte
Hi All,

didn't know where to plonk this so just plonked it here :D

could anyone suggest a reputable place in the UK, where i can get a Water Injection install carried out? I am based in the Midlands, however i dont mind travelling abit for the job to be done correctly.

Am basically looking at the Aquamist 2C system with 2E gauge.

I basically need a nice solid and clean installation.

The car is a 550BHP+ MR2 Turbo and possibly more with the 1.06 Garrett turbo housing once its fully mapped. Hence i need solid failsafes in place along.

Look forward to replies.

Cheers


I know of a company in Luton, Bedfordshire called PTS. They know our product very well. The 2e is not in Production. The 2c can only work with third party management system. I think a 2d or 1s +DDS3 is a good choice.

Richard

mb_3sgte 26-04-2006 08:18 AM

Thanks Richard, i'll check them out. I will be running a Motec M400 so a 2c should be ok.

Thanks


All times are GMT +1. The time now is 07:11 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.