HFS-3 BMW E36
 

Don't mind the pics I am no photographer.
3.2L motor, 12.5lbs of Boost, Vortech V2-SQ Si trim
http://i164.photobucket.com/albums/u...1/DSC01979.jpg
All the bits...
http://i164.photobucket.com/albums/u...1/DSC01985.jpg
Some tunes and a Howerton 1.25G tank
http://i164.photobucket.com/albums/u...1/DSC01962.jpg
http://i164.photobucket.com/albums/u...DSC01945-1.jpg
PVM Bracket
http://i164.photobucket.com/albums/u...1/DSC01975.jpg
http://i164.photobucket.com/albums/u...1/DSC01977.jpg
1.0 Jet
http://i164.photobucket.com/albums/u...1/DSC01978.jpg
Howerton Trim ring
http://i164.photobucket.com/albums/u...1/DSC01982.jpg

Re: Hfs-3 bmw e-36
 

very nice install. Like the bracket and the right angle jet.

Re: Hfs-3 bmw e-36
 

Nozzles installed....

http://i164.photobucket.com/albums/u...1/IMG_5859.jpg

Re: Hfs-3 bmw e-36
 

Just love those 90 degree banjoo fittings.

Re: Hfs-3 bmw e-36
 

New stuff....Changed to a back lite LED, adding a 3rd nozzle in the SC volute.

http://i164.photobucket.com/albums/u...1/IMG_7646.jpg

http://i164.photobucket.com/albums/u...1/IMG_7641.jpg

Re: Hfs-3 bmw e-36
 

very nice. You should take up photography, good pictures.

I believe you are lowering the boss.

Re: Hfs-3 bmw e-36
 

That is correct.....
http://i164.photobucket.com/albums/u...1/IMG_7650.jpg
http://i164.photobucket.com/albums/u...1/IMG_7652.jpg
http://i164.photobucket.com/albums/u...1/IMG_7656.jpg

The height difference between tanks...and the new pump input swivel.

http://i164.photobucket.com/albums/u...1/IMG_7639.jpg

Re: Hfs-3 bmw e-36
 

Looks like I can say I am done...for now
New adapter from Howerton Eng. As you can see it sits on top of the jet and allows provisions to feed the other two.
http://i164.photobucket.com/albums/u...1/IMG_7707.jpg
http://i164.photobucket.com/albums/u...1/IMG_7708.jpg

And the final placement. 2X 0.7 nozzles and a single 0.3 in the volute.

http://i164.photobucket.com/albums/u...1/IMG_7706.jpg

Re: Hfs-3 bmw e-36
 

I can't stop looking through those pictures repeatly. Work of art. Nice utilisation of thise cute little fittings from Howerton.

I aslo heard youn have good success with the controller reading the tec3 ECU. What next, armed with all those cooling jets. Boost to 25psi?

Re: Hfs-3 bmw e-36
 

Yes, The controller is working great !! I really appreciate the work that went in to getting the system in-line with the car.

Not sure what is on the horizon...but I am thinking maybe 17-18psi would be a good place to be.