to Richard L. how to chiptune for WI use?
Please Richard give me some advice in order to instruct an chiptuning specialist to adjust set-up in order to maximize performance for water + meth progressive injection for turbo diesel engine. He is not having any experience in WI and it will be helpful since I intend to implement WI tuning in Romania and I do not have here any specialist in order to make a proper WI oriented chiptuning.
Actually I was surprised not to find an WI experienced engineer even at Abott Racing. I need some help in order to pursuate clients that WI is well worthing and since now I managed only to tune an Saab up to 40% performance gain but it takes way too much time and knowledge to adjust injection parameter by WI needs (actually to fool ECU to inject by my goal). Thank you, Cristian |
Re: to Richard L. how to chiptune for WI use?
Hello Cristian.
I am not familiar with diesel chip tuning. I cannot recommend the basics: Diesel is an excessive air system, increasing boost will not achieve more power unless extra fuel in added. Two ways to achieve this: 1. Increase fuel line pressure 2. Increase the fuel by using 100% methanol on the water injection After matching the optinmum afr, you should monitor the EGT and increase water percentage and flow to control peak EGT. Keep egt below 800C. |
Re: to Richard L. how to chiptune for WI use?
Thank's Richard
|
All times are GMT +1. The time now is 12:20 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.