2004 Subaru STi - Aquamist 2D
here are some pictures of an install I did a few months ago...
the black box is the control unit... it holds the dds2 junction box, priming pump circuit, FIA, fuse for system and momentary switch to run the priming pump manually (also controlled by 2D system automatically)... http://www.ktrperformance.com/water_...ion/EJ2571.jpg the pump and related components are located behind the front bumper on the right hand side.. http://www.ktrperformance.com/water_...ion/EJ2572.jpg http://www.ktrperformance.com/water_...ion/EJ2573.jpg for the water tank, we used a version 8 spec C tank... http://www.ktrperformance.com/water_...ion/EJ2574.jpg I took the DDS2 box apart and made the LEDs remote mount and fit them into the instrument cluster... http://www.ktrperformance.com/water_...ion/EJ2575.jpg http://www.ktrperformance.com/water_...ion/EJ2576.jpg sorry for the horrible descriptions, i'm a little lacking in sleep lately |
All times are GMT +1. The time now is 02:28 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.