2004 Subaru STi - Aquamist 2D
 

here are some pictures of an install I did a few months ago...

the black box is the control unit... it holds the dds2 junction box, priming pump circuit, FIA, fuse for system and momentary switch to run the priming pump manually (also controlled by 2D system automatically)...

http://www.ktrperformance.com/water_...ion/EJ2571.jpg

the pump and related components are located behind the front bumper on the right hand side..

http://www.ktrperformance.com/water_...ion/EJ2572.jpg

http://www.ktrperformance.com/water_...ion/EJ2573.jpg

for the water tank, we used a version 8 spec C tank...

http://www.ktrperformance.com/water_...ion/EJ2574.jpg

I took the DDS2 box apart and made the LEDs remote mount and fit them into the instrument cluster...

http://www.ktrperformance.com/water_...ion/EJ2575.jpg

http://www.ktrperformance.com/water_...ion/EJ2576.jpg



sorry for the horrible descriptions, i'm a little lacking in sleep lately