waterinjection.info

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)
-   Aquamist systems in details and latest offerings (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=47)
-   -   NEW product... checkvalve jets (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=2323)

Richard L 15-09-2012 09:38 AM

NEW product... checkvalve jets
 
In order to minimise the dribbling effect immediately after the spray-off period, especially in jet location where there are pressure differences. We have introduce the full range of CVJ (check valve jets) for "direct port", multiple jets such as post IC, pre-IC and pre-turbo.

There is a 1-bar check-valve capsule inside the jet, the assemble is fully serviceable by end user. it is now available.

It is now possible to use multiple jets to any location from one distributing manifold block (see 2nd picture below) without the worry of water inside the lengthy hose being emptied after system stops spraying.


stevieturbo 15-09-2012 07:47 PM

Re: NEW product... checkvalve jets
 
Some nice stuff there !

Richard L 16-09-2012 04:03 PM

Re: NEW product... checkvalve jets
 
We are planning to life easier for those who wants to run multiple jets.

Dust 05-12-2012 05:31 AM

Re: NEW product... checkvalve jets
 
You mentioned before that you were looking at going up to 1/4 NPT for the nozzles, did this never happen?

Richard L 05-12-2012 07:32 AM

Re: NEW product... checkvalve jets
 
Yes, we have them... with internal filter and checkvalve.

http://www.aquamist.co.uk/NEW/NPT.jpg

JumpingJackson 27-06-2013 08:36 PM

Re: NEW product... checkvalve jets
 
Richard, i have some of those new nozzles, with them you included some sort little bronze swirly pieces that look like they go inside the nozzle :) What are these for?

Richard L 30-06-2013 08:50 PM

Re: NEW product... checkvalve jets
 
The little swirly parts are for other flow rates in case the CV jets flow too much. They are part of the jet internals.

Wolf_Tm250 12-07-2013 10:01 PM

Re: NEW product... checkvalve jets
 
Quote:

Originally Posted by Richard L (Post 17479)
In order to minimise the dribbling effect immediately after the spray-off period, especially in jet location where there are pressure differences. We have introduce the full range of CVJ (check valve jets) for "direct port", multiple jets such as post IC, pre-IC and pre-turbo.

There is a 1-bar check-valve capsule inside the jet, the assemble is fully serviceable by end user. it is now available.

It is now possible to use multiple jets to any location from one distributing manifold block (see 2nd picture below) without the worry of water inside the lengthy hose being emptied after system stops spraying.




Are these M8?
Can't find it anywhere.
Thanks

Howerton Engineering 14-07-2013 04:52 AM

Re: NEW product... checkvalve jets
 
Yes, they are the same as the standard jet, except about 7-8mm longer.

Wolf_Tm250 14-07-2013 09:01 AM

Re: NEW product... checkvalve jets
 
Quote:

Originally Posted by Howerton Engineering (Post 19034)
Yes, they are the same as the standard jet, except about 7-8mm longer.


Thank you.
Are they worth it in case of a dual jet setup spraying both post IC, or just in case of a pressure differential?


All times are GMT +1. The time now is 05:29 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.