Re: Peugeot 207 GTI - HFS4 Finished Tomorrow
 

yeh have a wee note in it for u with return address.

Re: Peugeot 207 GTI - HFS4 Finished Tomorrow
 

morning Richard, that's the controller back already, many thanks!

now just set the SC at 12, WL at 10, WH at 2 and we all good? just click the SC, WL and WH round with small screwdriver and that's them set?

Re: Peugeot 207 GTI - HFS4 Finished Tomorrow
 

The WL and WH sets the failsafe window width. you need to trim them until the faislafe does not trigger on a daily drive cycle.

Don't forget to set the SC so the gauge does not exceed 6 bars under the manual test.

Re: Peugeot 207 GTI - HFS4 Finished Tomorrow
 

will be going out shortly so will let you know how it goes.

just blipping the throttle there the B was lighting up , the SC giving 4 bars which am fine with.

Re: Peugeot 207 GTI - HFS4 Finished Tomorrow
 

been out in car and running perfect now Richard!

cant thank you enough!!

put the threshold back to default and the SC, WL and WH at recommended points by urself and flowing 3 and 4 bars which is perfect for me, real pick up in the car when it kicks in!!!

Re: Peugeot 207 GTI - HFS4 Finished Tomorrow
 

Does 4 bars represent WOT?

Re: Peugeot 207 GTI - HFS4 Finished Tomorrow
 

not sure what you mean by WOT ?????

Re: Peugeot 207 GTI - HFS4 Finished Tomorrow
 

Wide open throttle

Re: Peugeot 207 GTI - HFS4 Finished Tomorrow
 

ah!!

yeh it does. car performs really well with it, pulls all the way to red line.

Re: Peugeot 207 GTI - HFS4 Finished Tomorrow
 

You can advance the SC to show 5-6 bars instead of 4 bars. May be a click or two will do it. Do the same for the WL and WH. (all clockwise)