VW MK5 HFS-4 DPI install.
 

I did some work today and almost finished the aquamist install. Made two brackets for the distribution manifold port that bolted up to the noise pipe bracket on the alternator:

http://i246.photobucket.com/albums/g...-48-06_360.jpg

but ended up using this one
http://i246.photobucket.com/albums/g...-39-54_556.jpg

http://i246.photobucket.com/albums/g...-39-14_286.jpg

http://i246.photobucket.com/albums/g...-43-03_787.jpg

fav mounted on the engine mount (plastic bracket used to hold the noise pipe)
http://i246.photobucket.com/albums/g...-41-24_115.jpg

http://i246.photobucket.com/albums/g...-41-10_330.jpg

http://i246.photobucket.com/albums/g...-42-03_839.jpg

http://i246.photobucket.com/albums/g...-40-41_543.jpg

http://i246.photobucket.com/albums/g...-38-42_981.jpg


Now I just have to splice some ecu wires and make the final electrical connections and I'm ready to go.

Re: VW MK5 HFS-4 DPI install.
 

Looking great. Nice install.

What are the sizes of those checkvakve jets?

Re: VW MK5 HFS-4 DPI install.
 

jets are 0.3mm

Re: VW MK5 HFS-4 DPI install.
 

It looked like 0.7mm!!!

What power is this engine capable of?

Re: VW MK5 HFS-4 DPI install.
 

currently i'm running apr's K04 turbo and tune, but that's a mild safe upgrade for a daily driven car.

http://www.goapr.com/includes/img/pr...tock_93_cc.gif

Re: VW MK5 HFS-4 DPI install.
 

Final install pics of my aquamist kit.

2 gallon Tank. It's also mounted to the floor and can be easily moved to access spare tire if needed. Fold the seat and just have to push the tank in.

http://i246.photobucket.com/albums/g...-20-41_634.jpg

Outlet of the intercooler drilled and tapped. Second pic shows the jet installed.

http://i246.photobucket.com/albums/g...-00-28_101.jpg

http://i246.photobucket.com/albums/g...-08-45_718.jpg

Ecu wires. I stripped the old tape more than enough, but gave me lots of room to tap the wires properly.

http://i246.photobucket.com/albums/g...-00-59_591.jpg

Once I confirmed all the connections were leak free I installed some protective sleeves over the lines.

http://i246.photobucket.com/albums/g...8-19-37_11.jpg

http://i246.photobucket.com/albums/g...-19-48_687.jpg

http://i246.photobucket.com/albums/g...-19-59_748.jpg

Have some pics showing how I routed the main feed line from the trunk to the engine bay using the fuel line route, but will upload them later.

Re: VW MK5 HFS-4 DPI install.
 

Very nice install. It's always good to see the final results of where all this stuff goes!