waterinjection.info - BMW Mini-R56 USDM wiring

Page 3 of 3

Show 40 post(s) from this thread on one page

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)

- HFS-4 user manual and wiring diagrams (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=49)

- - BMW Mini-R56 USDM wiring (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=2184)

brightside

15-01-2013 04:39 PM

Re: BMW Mini-R56 USDM wiring

It that a typo on the website? Just from the scale of things it does look to be 3/8 BSP.

Richard L

15-01-2013 07:13 PM

Re: BMW Mini-R56 USDM wiring

All the aquamist HFS-xxx pump with 3/8BSP-M to 1/8BSP-F adaptor as standard.

Adding this fitting will make the joint very flexible.

brightside

17-01-2013 04:08 AM

Re: BMW Mini-R56 USDM wiring

Ah, ok. This is what happens when you take 8 months to complete the install.

Should i order from you or Jeff?

i'll also start a thread about my install. Waiting for my gauge mount also now.

Richard L

17-01-2013 08:48 AM

Re: BMW Mini-R56 USDM wiring

It is completely up to you. If you have been dealing with Jeff before, you can continue. I am here for your technical support regardless.

hor_fun

24-03-2013 04:25 PM

Re: BMW Mini-R56 USDM wiring

Hi richard

Any updates for n18 to use hfs4 or hfs3?

Wanting to use your products on my mini.

Quote:

Originally Posted by Richard L (Post 16961)

I looked into this briefly. The N18 DME is still made by Siemens I cannot verify the the pin out compatibility.

N14 Engine - N14B16AC (171hp / 177 ft-lbs)
* infinitely variable single VANOS (intake only)
* Siemens DME MED17.2 engine management

N18 Engine - N18B16M0 (181hp / 191 ft-lbs)
* infinitely variable double VANOS
* map-controlled oil pump
* variable valve timing (Valvetronic) with 3-phase servomotor and integrated eccentric shaft sensor
* composite camshaft construction
* new piston design
* Siemens DME MEVD17.2.2

Richard L

25-03-2013 11:39 PM

Re: BMW Mini-R56 USDM wiring

Both H3 and H4 will work on the new mini. I just don't have the DME pin out details to make a drawing.

I believe they will be the same.

Diego9

12-04-2013 03:25 AM

Re: BMW Mini-R56 USDM wiring

I just have it installed in a GP2, so it will work in N18 engines. Now I need to learn how to set it up and read the gauge.

Richard L

12-04-2013 07:37 PM

Re: BMW Mini-R56 USDM wiring

This is good news. I was unable to get the new mini DME pinout. Now I don't have to. Thanks for the update.

All times are GMT +1. The time now is 01:12 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page