waterinjection.info - 08 WRX failsafe w/ HFS6 & GrimmSpeed EBCS

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)

- Your one-stop search for water/methanol injected cars (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=31)

- - 08 WRX failsafe w/ HFS6 & GrimmSpeed EBCS (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=2031)

obsolete

18-07-2011 11:10 PM

08 WRX failsafe w/ HFS6 & GrimmSpeed EBCS

1 Attachment(s)

I'm using a GrimmSpeed 3-port EBCS and an HFS6. Would like to know the ideal way to utilize the failsafe on the HFS6.

Since this EBCS connects to factory harness and such, should I connect white and brown wires as I would with an OEM boost control?

Also, is this diagram of HFS3 wiring applicable with the HFS6 as well?

Thanks!

Howerton Engineering

19-07-2011 04:10 AM

Re: 08 WRX failsafe w/ HFS6 & GrimmSpeed EBCS

As for the failsafe yes, just consider the GS unit to be the same as the OE unit for hooking up the wiring.

The connector on the HFS-6 is yellow, but the red/green/brown/white are all used the same.

All times are GMT +1. The time now is 05:12 AM.