waterinjection.info

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)
-   Your one-stop search for water/methanol injected cars (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=31)
-   -   Aquamist 2d Install ? on an FD? (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=2140)

Richard L 01-02-2012 12:44 PM

Re: Aquamist 2d Install ? on an FD?
 
It appears the wiring can be taken from the ECU. See below:

http://www.aquamist.co.uk/forum/gall...7/injector.gif

Tem120 06-04-2012 03:38 AM

Re: Aquamist 2d Install ? on an FD?
 
ok its been a long time I got it all wired in , and I almost got hte car on the road

the only thing I'm lacking now is some sort of way to inject the water into the engine , just post IC ??

and also http://www.howertonengineering.net/p...Weld-Bung.html

will this work with the aqua mist 2d ?

Tem120 06-04-2012 04:10 AM

Re: Aquamist 2d Install ? on an FD?
 
hmm I have a question I dont know if this is the correct place to ask . but maybe someone can point me in the right direction ..


So when the A/I is working and functioning correctly . should it affect my Air/fuel Ratios?

will it read richer as the alcohol burns ? or will it read as if it wasn't there .

Tem120 04-05-2012 04:17 PM

Re: Aquamist 2d Install ? on an FD?
 
how do I adjust when it injects water?

its currently injecting at around 7 PSI . I'd like fori t to inject earlier

Rub20B 11-12-2019 11:57 PM

Re: Aquamist 2d Install ? on an FD?
 
Having no experience with the kit itself I would def take either of the secondary injectors. Simply because you only need water in a boosted area, and the sec inj are on when being boosted. Using the primaries could also work but they can reach consoderable duty cycle with no or very low boost just before the secondaries get ramped in.


All times are GMT +1. The time now is 12:01 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.