waterinjection.info - help matching omni 4bar map sensor to hfs4 range

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)

- Aquamist HFS-4 forum (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=48)

- - help matching omni 4bar map sensor to hfs4 range (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=2297)

ziad	10-08-2012 02:40 AM

help matching omni 4bar map sensor to hfs4 range

has anyone done this, could they help me. on the manual it says 5v, 2bar or a 3.5bar map sensor. i have an evo8 running an omni 4bar wanting to use boost for meth flow.

Richard L

10-08-2012 06:59 AM

Re: help matching omni 4bar map sensor to hfs4 range

The range selection is only useful for the threshold trimmer to start at 1 atmosphere. The rest of the span is not important as all MAP sensors have 0-5V output.

For a 4-bar map sensor, select 3.5bar option.

ziad	13-08-2012 01:54 AM

Re: help matching omni 4bar map sensor to hfs4 range

thanks Richard

All times are GMT +1. The time now is 07:03 AM.