waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)
-   Injection Mixtures (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=15)
-   -   'straight meth' mixtures (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=3181)

luke2152 06-06-2019 12:20 AM

'straight meth' mixtures
So I've decided to go down the path of pure methanol and lots of it (for fueling purposes mostly). To that end I was wondering if mixing a small amount of water in would make sense:

1. It would stop the methanol absorbing extra water from atmo ie. stay a predictable mixture.
2. Have a bit of anti detonation properties as well.
3. I know the system is supposed to be able to handle pure methanol but would it be more durable corrosion wise with a slightly diluted mix (or would the water indeed be the corrosive element?)

All 3 reasons are not my priority but did cross my mind. If I'm planning on running straight meth, am I better off giving it 5% or 10% water?

All times are GMT +1. The time now is 09:43 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.