waterinjection.info

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)
-   HFS-3 wiring diagram to a specific model of car (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=37)
-   -   Subaru WRX to HFS-3 wiring diagrams (2002-2009) (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=1701)

Richard L 04-09-2014 11:10 PM

Re: Subaru WRX to HFS-3 wiring diagrams (2002-2009)
 
I need to update the HFS3v3 soon. Meanwhile, you can use the wiring diagram below:

http://www.aquamist.co.uk/vbulletin/...ead.php?t=2189

Dust 11-02-2015 06:53 PM

Re: Subaru WRX to HFS-3 wiring diagrams (2002-2009)
 
Sorry to bring this back from the dead, but why cut boost and signal ECU? Can the ECU not do both? Just wondering...

Richard L 13-02-2015 10:30 PM

Re: Subaru WRX to HFS-3 wiring diagrams (2002-2009)
 
It wasn't clear, apologies, it was meant to be either/or.

kornshadow097 13-11-2015 05:32 AM

Re: Subaru WRX to HFS-3 wiring diagrams (2002-2009)
 
I had a short and an rechecking the wiring. The wiring of this diagram doesnt agree with the WRX ECU. I just measured current on each of the partially pink injector wires and all of them have a (+) signal, while your green wire states that it requires a (-) signal from the injector.

http://www.innovatemotorsports.com/r...ru_Impreza.php

This shows the same thing.

So is the polarity OK? Because I'm pretty sure most of the WRX if not all Impreza have a common ground and only "speed" (+) outputs to the ECU from their Injectors.

Richard L 13-11-2015 08:23 AM

Re: Subaru WRX to HFS-3 wiring diagrams (2002-2009)
 
There is nothing wrong with either diagrams.


All times are GMT +1. The time now is 05:56 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.