waterinjection.info - Wires red and green of 2D to 97 Miata #1 injector

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)

- Your one-stop search for water/methanol injected cars (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=31)

- - Wires red and green of 2D to 97 Miata #1 injector (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=1055)

ajrdds

01-05-2006 08:20 PM

Wires red and green of 2D to 97 Miata #1 injector

Wireing 2d to 97 miata #1 injector. Red and green of 2d to what colors on injector?
Or, red and green of 2d to what pinouts on ecu?
Thanks in advance for any help. AJRDDS

Richard L

02-06-2006 12:03 AM

The red wire to a constant, switched 12V, The green wire splice to the pulse wire of the injector harness.

If you are not sure which is which, just put the red wire to the battery+ temporarily and test the green wire to either one of the injection wire. The wire that makes the green led blinks (on FIA2) is the pulsed wire.

Richard

All times are GMT +1. The time now is 01:01 AM.