Cammy's EVO VII - for road & track
Hey everyone,
Install is not finished 100% yet as my car is still waiting for its new motor to be built :). But I thought I would share my progress and update as the build continues. :cool: Howerton Engineering tank http://i287.photobucket.com/albums/l...tonengtank.jpg Running the line through the floor of the boot ....... http://i287.photobucket.com/albums/l...ermethline.jpg and under the car with the fuel lines. http://i287.photobucket.com/albums/l...neundercar.jpg FAV unit sits under the airbox when it goes back in :) http://i287.photobucket.com/albums/l...3/HFS-3FAV.jpg Looking for power for tank LED's http://i287.photobucket.com/albums/l...ngforpower.jpg Power found in the tail lights. http://i287.photobucket.com/albums/l...powerfound.jpg LED's FTW !!! http://i287.photobucket.com/albums/l...engtankLED.jpg |
Re: Cammy's EVO VII - for road & track
http://i287.photobucket.com/albums/l...3/IMG_8457.jpg
http://i287.photobucket.com/albums/ll142/aevo3/1-5.jpg Control Unit wired up to sensor's. still need to do the power. http://i287.photobucket.com/albums/l...controlbox.jpg Gauge in central easy to read area. http://i287.photobucket.com/albums/l...HFS-3gauge.jpg Drilling hole for jet. http://i287.photobucket.com/albums/l...foradaptor.jpg Tapping holes. ( finding NPT taps in my town ain't easy ! ) http://i287.photobucket.com/albums/l...pingthread.jpg Yeah I tapped it. http://i287.photobucket.com/albums/l...ppedthread.jpg adapter in thread ready for jet. http://i287.photobucket.com/albums/l...tinadaptor.jpg Jet in. http://i287.photobucket.com/albums/l...etfinished.jpg LC1 - let the tuning begin..... when I get an engine anyways.... http://i287.photobucket.com/albums/l...rfuelgauge.jpg |
Re: Cammy's EVO VII - for road & track
Forget intercooler pipe jets, this shit is the real deal.
Thanks Jeff @ HE for the always great service ! HE FTW :) http://i287.photobucket.com/albums/l...aahboiiiii.jpg |
Re: Cammy's EVO VII - for road & track
Beautiful set up mate, I love EVO's ;)
|
Re: Cammy's EVO VII - for road & track
thanks mate :) love the work on the RX-7 also ! :)
I will take more photo's when I drill and tap the new threads for the direct port jets and as the new motor goes in and get turned over for the first time. :cool: |
Re: Cammy's EVO VII - for road & track
Very nice install.
|
Re: Cammy's EVO VII - for road & track
Thank you Richard. Don't worry to much about the BS thread on EvoM, people with half a brain can see through that little desperate grab at marketshare....
Jets being placed on the underside of the intake manifold, for a clean install. http://i287.photobucket.com/albums/l...3/IMG_0110.jpg |
Re: Cammy's EVO VII - for road & track
It is annoy to read those threads, it is not a nice way to grab market share.
The tapped holes are nice and straight. it is going to look great and functional. I can see that you are very careful on covering up the tank so no deris will be introduced accidentally. |
All times are GMT +1. The time now is 02:13 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.