waterinjection.info

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)
-   Injection Mixtures (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=15)
-   -   Which way to 50/50? (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=1951)

Dust 10-03-2011 05:44 AM

Which way to 50/50?
 
I have access to
1. 95%M5%E at 400 yen for 1L.
2. Battery water (distilled?) for 100 yen for 1L.
3. Windshield wiper fluid, no bubbles is 185 for 2 liters at 40% methanol,
4. Bubbly fluid at 45%M, 175 yen for 2 Liters and
5. no bubbles 50%M for 400 yen for 2 liters
and I have a brita water filter that is not used for drinking.

I just lost an IAC valve at $400 and I feel, without seeing it, that it got some residue in it and caused it to short out. So i am looking at maybe running something safer for my car parts. I have been back and forth between 25 and 50% meth, but being that I have 64 hp(government mandated), even with upped boost, I can't really feel a difference in the two. 25% meth would obviously allow me to spray cheaper. What mix and what fluids should I be using?

Richard L 19-04-2011 07:27 PM

Re: Which way to 50/50?
 
What system do you have?

If you have a pump speed system without an inline solenoid valve, they tend to dribble after off-throttle. This is due to pressurised line contracting. The longer the line, the more dribble.

Dust 20-04-2011 08:10 AM

Re: Which way to 50/50?
 
Until I get a car that can be tuned I see no reason to upgrade. Been reading about and eying the HFS-3, and have a folder full of messages from Howerton, but until I get back to the states from here in Japan, the 21 oz. engine with no tuning options will just get enough fluid to keep the temps down.


All times are GMT +1. The time now is 08:46 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.