waterinjection.info

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)
-   Injection Mixtures (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=15)
-   -   OK just water? (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=199)

AutoX47 15-04-2004 09:24 PM

OK just water?
 
Hey guys,

Looking to set up water injection setup on my Volvo for decrease in air temperature and less carbon. I run up to 1.25 bar which seems fine on 93 octane if it is ~70 degrees out. I am hoping with water injection the management system will be happy with 18psi. I do not run a boost controller to force it to run 18 because I want the management system to be able to protect itself.

Will I be fine with injecting just water or do I need alcohol also? This is not a dragster I use it for occasional autocross but mostly a street car. Also any problems with spearco? Again like I said this is not a race vehicle

Charged Performance 15-04-2004 11:18 PM

Just water will be fine - and preferable since if you use alcohol you will mess your classing up with auto-x - even with WI you may get undesirable classing.

AutoX47 16-04-2004 03:19 AM

k great

thaks for the fast response. Like I said I'm goin with the spearco setup. I chose it well 1 the cost was nice but I found another system with a fancier pump but the speraco comes with a nice sized tank already. I guess sure I could have made a tank but between the mazda and the sunbeam I have too many cars to get ready for the racetrack to tool with the volvo :)

Can you run a higher quality nozzle with the spearco? I've heard of people using nozzles out of the mcmaster catalog along with running aquamist nozzles on lower end systems.


All times are GMT +1. The time now is 08:16 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.