waterinjection.info - HFS-2 to HFS-3 fail safe no flow bars

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)

- Aquamist HFS-3 forum (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=34)

- - HFS-2 to HFS-3 fail safe no flow bars (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=2507)

90intherain

10-09-2013 03:12 PM

HFS-2 to HFS-3 fail safe no flow bars

I had an HFS-2 and it worked fine. I recently went to 1000cc injectors and an HFS-3. I need to know if I need to adjust threshold and gain. Also I'm not getting any flow bars. And my fail safe is kicking in. Need help. Thanks.

90intherain

11-09-2013 01:07 AM

Re: HFS-2 to HFS-3 fail safe no flow bars

I am getting the appropriate green F-IDC.

Richard L

11-09-2013 08:15 AM

Re: HFS-2 to HFS-3 fail safe no flow bars

If you are using 1000cc injectors, the injector duty cycle will be low. Can you put the jumper link to FDC and tell me how many bars you are reading.

90intherain

12-09-2013 12:33 AM

Re: HFS-2 to HFS-3 fail safe no flow bars

I was only reading one. I jumpered the fav and sys to purge the system. Jumpered the bar and it was only showing 4 bars. Adjusted the bars. Went for a test drive and it all works now. Thank you!!

All times are GMT +1. The time now is 06:05 PM.