waterinjection.info

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)
-   Aquamist HFS-3 forum (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=34)
-   -   Differences between v2 and v3? (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=3098)

harboged 26-10-2017 01:22 AM

Differences between v2 and v3?
 
Hi,

I have searched but haven't been able to find what the differences between v2, v3 and later versions are. Could someone please help me out?

Best regards,
Per

Richard L 26-10-2017 07:16 AM

Re: Differences between v2 and v3?
 
The differences between v2 and v3

HFS3...
1. V2 has one flow table compared to 3 on v3. It may not read Di signals after 2010.
2. V3 has a more advanced Di signal decoder that will handle 99% of the engines up to 2015
3. V3.1 can decoder 99% of DI signals from 2008 to now.

Flow sensor/failsafe construction, gauge and controller circuitry has also been improved.

harboged 26-10-2017 12:15 PM

Re: Differences between v2 and v3?
 
Quote:

Originally Posted by Richard L (Post 24035)
The differences between v2 and v3

HFS3...
1. V2 has one flow table compared to 3 on v3. It may not read Di signals after 2010.
2. V3 has a more advanced Di signal decoder that will handle 99% of the engines up to 2015
3. V3.1 can decoder 99% of DI signals from 2008 to now.

Flow sensor/failsafe construction, gauge and controller circuitry has also been improved.

OK, thank you! :)

Is the hardware interface between the old and new versions, the same? Ie connectors for jets, hoses, etc.

Richard L 26-10-2017 05:11 PM

Re: Differences between v2 and v3?
 
the same other than the user port. V3 has a few more I/O ports


All times are GMT +1. The time now is 03:31 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.