Mini Cooper HFS-3v3.1 help.
2 Attachment(s)
I bought an HFS-3 v3.1 system second hand from a guy with Porsche. He never installed the system so it's still new in the box. I've been looking over the manual and it seem there is a soldering modification that needs to be done in order for the system to work properly on my car. Can anyone confirm if this is correct on the diagram?
Attachment 423 Attachment 422 I have checked my circuit board and it is not soldered between link 1 & 2 for the single jet application. |
Re: Mini Cooper HFS-3v3.1 help.
I believe the 3.1 has jumper link instead of soldering links for changing iDC scaler.
But for a single just operation, you need to solder link 2&1. Is this something you can do? |
Re: Mini Cooper HFS-3v3.1 help.
Yes, it is something I can do. I just needed to be certain that it needed to be done for my application. Thank you.
|
Re: Mini Cooper HFS-3v3.1 help.
for one jet, you need to do it.
|
All times are GMT +1. The time now is 10:03 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.