waterinjection.info

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)
-   HFS-4 user manual and wiring diagrams (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=49)
-   -   Mazdaspeed 3 (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=2197)

jdraps13 03-05-2015 06:09 PM

Re: Mazdaspeed 3
 
Hey Richard having troubles setting up my failsafe, seems to be spraying with next to no load, my sc is set at 6 bars I think wh is set properly but can't figure out how to set WL proper, how might I delay spray

Richard L 03-05-2015 06:15 PM

Re: Mazdaspeed 3
 
Quote:

Originally Posted by jdraps13 (Post 21435)
Hey Richard having troubles setting up my failsafe, seems to be spraying with next to no load, my sc is set at 6 bars I think wh is set properly but can't figure out how to set WL proper, how might I delay spray

What is the position of the "THRES" on the controller?

jdraps13 03-05-2015 06:25 PM

Re: Mazdaspeed 3
 
I followed the instructions and aet fully counter clockwise still

Richard L 03-05-2015 07:07 PM

Re: Mazdaspeed 3
 
Quote:

Originally Posted by jdraps13 (Post 21437)
I followed the instructions and aet fully counter clockwise still

Fully counter-clockwise is for testing only. Set it to 10am and see if you can set the WL.

jdraps13 03-05-2015 09:39 PM

Re: Mazdaspeed 3
 
Ok so it's not spraying with every blimp of the throttle now but, still can't seem to get the lower failsafe to trip maybe my upper is set too high

Richard L 04-05-2015 07:38 AM

Re: Mazdaspeed 3
 
What are the settings for the following:
(face of a clock)

THRES ....... ?
SC .............?
WL ............ ?
WH ..........?

Let me know.

jdraps13 04-05-2015 12:09 PM

Re: Mazdaspeed 3
 
Thresh 12am
Sc 2am
WL 1am
WH 11am

jdraps13 04-05-2015 02:27 PM

Re: Mazdaspeed 3
 
One last thing I was checking out the wiring and I am wondering if I set up 2AA wrong, For the wire that needed to be cut I used one posi lock with brown and 2AA connected to one end and white and 2AA to the other is that correct or should use two posi locks? One for brown and one end of 2AA and the other for white and 2AA so there is no more connection for 2AA, thanks Richard

Richard L 05-05-2015 08:29 AM

Re: Mazdaspeed 3
 
Have you cut the 2AA wire into two halves?

jdraps13 05-05-2015 01:04 PM

Re: Mazdaspeed 3
 
Yes I sorted that out now use two posi locks instead of just the one lower limit failsafe is still giving me s hard time tho


All times are GMT +1. The time now is 12:19 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.