waterinjection.info

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)
-   Aquamist HFS-4 forum (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=48)
-   -   Want to install custom meth plate (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=3082)

Jroyalty7 21-07-2017 11:58 PM

Want to install custom meth plate
 
Hello,
I plan on installing my hfs4 kit with custom meth plates that need to be tapped for the injectors. I am looking for help/advice on what size checkvalve jets I should use, whether I need a compression or hosetail port option, and what size/pitch is used in order to update the manufacturer of the meth plates for my 2013 audi b8.5 s4. the link to the meth plates are here: http://sillyrabbitmotorsport.com/3.0...-injection-kit

I followed what I could from a previous s4 owners thread (infinkc) but with missing pictures and some descriptives missing I could really use some assistance please and thank you.
TIA for any help anyone can provide on this. My first meth/water kit install.

Jroyalty7 22-07-2017 12:10 AM

Re: Want to install custom meth plate
 
Also I am assuming I will need this manifold to run the 6 direct port injection nozzles?
http://www.aquamist-direct.com/806-4...-hex-manifold/

Richard L 22-07-2017 07:14 AM

Re: Want to install custom meth plate
 
Ideally, you should get the DP bundle as it contains all the parts for a successful direct port installation.

http://www.aquamist-direct.com/806-4...his-shop-only/

http://www.aquamist.co.uk/forum/jet installation.gif


http://www.aquamist.co.uk/forum/2016-selection.gif

Jroyalty7 23-07-2017 02:41 AM

Re: Want to install custom meth plate
 
Thank you for the reply and I will look into getting that kit from a local distributor. Another question regarding the hfs4 as I bought the kit used and it was previously on a bmw are there any changes internally I should make for the controller? Is there an audi b8/b8.5 specific install guide/manual available? I am concerned about the ecu wiring and making sure that it is correctly configured. This will be my first meth kit install so I am pretty green as far as the ins outs of everything. Thank you again!

Jroyalty7 23-07-2017 02:16 PM

Re: Want to install custom meth plate
 
My engine code is cgxc

Richard L 23-07-2017 03:25 PM

Re: Want to install custom meth plate
 
What is the SN of the HFS4? I will check it for you can may post a wiring diagram if we have one. Which Audi model and year is this?

The controller should be OK if it is not hacked too much

Richard L 23-07-2017 05:08 PM

Re: Want to install custom meth plate
 
Since this is a supercharged engine, we cannot implement the failsafe on this engine except cutting the ignition etc.. Here is the wiring diagram:


Jroyalty7 23-07-2017 05:58 PM

Re: Want to install custom meth plate
 
Quote:

Originally Posted by Richard L (Post 23854)
What is the SN of the HFS4? I will check it for you can may post a wiring diagram if we have one. Which Audi model and year is this?

The controller should be OK if it is not hacked too much

Hey Richard thank you for the reply, s/n is: 122169
Car is a 2013 s4 b8.5

Also I was thinking of running the 0.4mm jets 140cc for each port with a direct port injection meth plate, Im planning on running a bit more aggressive tune. That sound reasonable? Thanks for all your help

Jroyalty7 23-07-2017 06:22 PM

Re: Want to install custom meth plate
 
https://flic.kr/p/VMHssB
https://flic.kr/p/VMHrJx
Pics of the controller

Jroyalty7 23-07-2017 06:41 PM

Re: Want to install custom meth plate
 
Another question, I received the fav but appears to be missing the metal mount as shown in this pic:
https://flic.kr/p/WLc499

This is mine:
https://flic.kr/p/X29Sd8

Is this part sourceable alone or have to buy a whole new fav? Thanks again for your continued help!


All times are GMT +1. The time now is 11:04 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.