Re: New water tank system
Quote:
We will supply four double length acetal stand-offs and four longer bolts. http://www.aquamist.co.uk/tank/bolt2.jpg |
Re: New water tank system
Quote:
|
Re: New water tank system
From
http://www.aquamist-direct.com/806-6...-version-only/ The bracket is ergonomically designed to minimise installation time. Offering chassis floor or cross-rail mounting options. Four holes at the centre section of the bracket is intended for mounting an aquatec pump below. |
Re: New water tank system
http://www.aquamist.co.uk/tank/warning.jpg
Uses little space... http://www.aquamist.co.uk/tank/side.jpg |
Re: New water tank system
I'm thinking out loud here
Will need to check for space but thinking I could also use this as a buddy tank For my existing howerton mini r53 boot install, perhaps mounting direct to the outside wall Sound possible for a retro fit? |
Re: New water tank system
Outside wall?
The tank is 13" x 13" x 2.6", check the side panel of the boot. Here is a trial fit to a smart car: http://www.aquamist.co.uk/tank/smart.jpg |
Re: New water tank system
http://howertonengineering.com/mini/
Using outside facing sheet metal as the fixing point. The sloping seat back is the challenge on a r53 Will be a very tight fit, Might work if on slight angle or offset say -10 degrees from vertical |
Re: New water tank system
I have emailed you and jeff some pics of my mock up
Will be better than a thousand words here As was struggling to resize on iPad |
All times are GMT +1. The time now is 09:18 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.