waterinjection.info

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)
-   Your one-stop search for water/methanol injected cars (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=31)
-   -   F13 M6 hfs 3 post install questions (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=3211)

Krisgt30 01-05-2020 07:03 PM

F13 M6 hfs 3 post install questions
 
I haven’t adjusted any of the settings out of the box for the hfs3 unit. Chose to hook it up via map sensor (boost via just blue and red cables) instead of injector pulse (green). I Turned on the vehicle no leaks. Gauge shows S and led lit green in the back. However under wot I am not seeing the blue bars on the gauge light up. Any recommendations for troublshooting?

Krisgt30 02-05-2020 04:30 AM

Re: F13 M6 hfs 3 post install questions
 
Just an update, I did not wire the injectors to the system as I am running this off boost (map) and have that wired. Do I still need to wire the direct injection system to have this system running?

Richard L 02-05-2020 08:28 AM

Re: F13 M6 hfs 3 post install questions
 
If you run boost only, you need to solder link MPS on the underside of the circuit board and cut IDC.

Also move jumper link from iDC to MPS

Krisgt30 02-05-2020 05:16 PM

Re: F13 M6 hfs 3 post install questions
 
Thank you for the response will get on that ASAP!


All times are GMT +1. The time now is 12:36 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.