waterinjection.info

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)
-   Gasoline Forced-Induction (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=17)
-   -   Supercharged V8 and HFS-5 (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=2437)

slow ride 09-04-2013 07:39 PM

Supercharged V8 and HFS-5
 
Hello,

I will be running the HFS-5 with DDS v10. I plan on using it with a hobbs switch to trigger at 8psi. I have an overdriven magnacharger (roots) making around 14 psi in my 6L Pontiac GTO. I have a couple questions:

I want to know what size jets I should use. I will be using 50/50 mix of meth and water on 93 octane and 57# injectors. The car will be making anywhere between 550-600whp. I tried using the a calculation chart, but I must be doing it incorrectly as my results are making no sense.

My other question is where should I mount my nozzles and how many nozzles do I need? Here is a picture of my setup:

http://i91.photobucket.com/albums/k2...ps985cf4ed.jpg

slow ride 11-04-2013 03:59 AM

Re: Supercharged V8 and HFS-5
 
bump...anyone?

Flr Power 11-04-2013 03:51 PM

Re: Supercharged V8 and HFS-5
 
You will probably need between 800-1400cc/min of water/meth. The final injection ratio to fuel would largely depend on how close is detonation when the engine reaches maximum power/boost.


All times are GMT +1. The time now is 12:32 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.