Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
 

I will be working towards compiling wiring diagrams for as many makes of cars as possible for the HFS-3. I, of course need help from all your guys who owns the car to supply me as much information as possible, with feedback.

I would be grateful if you guys can post some installation images and share the experiences with others.

Richard

Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
 

nice pics there richard... will be good help :)

Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
 

I will try to make more of theres drawings for other cars. It would be nice if people will post some of imechanical work on the HFS-3 install.

I can't wait for the tephra's ALT-MAP for the EvoX.

Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
 

great schematic Richard definatley cleared things up for me.
did the basic wiring today, il get started on the ecu tapping by next weekend.

Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
 

ok thanks Richard the diagrams work 100% for a JDM 8MR, thanks.

Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
 

If you have an opportunity to take some pictures of the install if possible.

Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
 

For the JDM EVO8 MR i am supposed to tap wire 64 for Tephra map switching failsafe, however I am not seeing any wire there...am I supposed to place my own wire there?

Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
 

Yes, the slot is empty. I am not sure where you can get the pins form . there is someome on the evom.net selling a pre-wired cable.

Richard

Re: Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)
 

Hi Richard, can you post up a diagram for EVO X (EDM/ADM/JDM) with failsafe using Tephra Alt-Map switch via ECU pin 115?